Pedal Assistance System PAS for Hollowtech II HII eBike electric bike with KT LCD3 hall sensors
Description
<h1>Pedal Assistance System PAS for Hollowtech II HII eBike electric bike</h1> ####Works with KT LCD3 hall sensors Dears, This is still development phase - more coffee and test is needed to be perfect, but this prototype is working :) ####1. Why? I want to have stable drive recogision mount instead smallest gear - not used in ebike often. ####2. How to mount? Mark the magnets with the side to be used upfront to sensor. Use small hammer with tool to remove magnets from original magnet blate and then gently press in in to print by pliers, with marked surface on one site. Do not use iron to mount! - it will destroy the magnets. Print the screws with maximum 0.1 and 100% infill, on slow mode. Use Pet-G. ####3. Do you liked? You can really buy me a coffee to have power for future tests and designs: https://www.paypal.me/cisopl https://www.buymeacoffee.com/cisopl ####4. Change records: 24.10.2023 - Added a thing <b>Disclaimer: Use at your own risk! I assume no liability for damages.</b> https://www.ciso.pl
Statistics
Likes
0
Downloads
0