Door stop wedge
Description
I use Cura slicer software and I use these settings: Infill Density: 50% Infill Pattern: Zig Zag Shell Thickness: 0.8 - 0.8 Support Type: Normal Support Placement: Touching Buildplate
Statistics
Likes
0
Downloads
0
I use Cura slicer software and I use these settings: Infill Density: 50% Infill Pattern: Zig Zag Shell Thickness: 0.8 - 0.8 Support Type: Normal Support Placement: Touching Buildplate
Likes
0
Downloads
0