Bitscope Mini BS10 P01 Support
Description
Using the Bitscope SP01 with the Bitscope Mini (BS10), you will find a enormous amount of stress on the header port when using attachments like BNC probes or even just having wires for the logic pins attached. As I could not find any solutions for this issue I designed a simple printable holder that allows the SP01 to be mounted and held while the Bitscope Mini BS10 is still removable. Printed in PETG on a Self fabricated Delta. Printed at 230 with 0.2mm Layer height and a infill of 30%.
Statistics
Likes
0
Downloads
0