Bob, devourer of phones
Description
Meet Bob. Got some old ASIC tubes laying around? Bob will hold 10 phones in a standard format 120x120 ASIC chassis. Specifically designed for the Z9 mini case in mind. The density of 10 phones can *easily* be cooled by a standard 120mm case fan, don't need to use the ASIC fan (or use it with a speed controller and turn it down as far as it will electrically allow, or temp-controlled). Have confirmed that devices will not cascade heat each other so long as air is flowing. Note 1: Will fit phones 80mm wide by 10mm thick max. CAT phones will not fit period unless you take the MB out, and then I'm working on a different design for those! Pixels won't fit unless you slot them in usb port towards the front (backwards) and then they fit fine. Camera bump is too thick; might be a v3 or 4 revision. Note 2: Print 2 for a Z9 mini case, push the first one all the way in against the fan and then hot glue or stickie the second one way towards the back so it holds the phones in-line and can't create a pinch spot where air can't travel. Probably have to print 4 for any other ASIC silo. I'm thinking up a revision to make them more easily loadable but don't have a big tube right now.
Statistics
Likes
0
Downloads
0