Calibration Cube XYZ
Description
This calibration cube XYZ is a simple and effective way to calibrate your 3D printer. It is a 20mm cube with X, Y, and Z markings on the sides, so you can easily measure the dimensions of your prints and make adjustments to your printer settings as needed. Features - 20mm cube with X, Y, and Z markings - Easy to print and use - Effective for calibrating all three axes of your printer - Can be used to diagnose common printing problems Instructions To calibrate your 3D printer using this cube, simply print it and measure the sides with a caliper. The sides should be as close to 20mm as possible. If the sides are not 20mm, adjust your printer settings accordingly. You can also use this cube to diagnose common printing problems, such as overextrusion, underextrusion, and warping. For example, if the sides of the cube are not square, this may indicate that your printer is overextruding or underextruding. If the sides of the cube are warped, this may indicate that your print bed is not level or that your printer is not calibrated correctly. Enjoy!
Statistics
Likes
0
Downloads
0