eMake3d auto fill/drain adapter
Description
This replaces the stock adapter that came with the printer, and has to be relocated. There is not enough room on the backside of the vat to fit between the vat and the print bed when it lowers. There is a built in screen to filter out any cured loose parts that could be in the vat. For now, this will have to be used as an auto fill part, until someone figures out a way to reverse the pump to drain the vat. One option is to just throw in a second pump, then this could be an additional part to put on the vat just for suction. Another option is to replace the stock switch with a 3 position switch and add another relay board...
Statistics
Likes
0
Downloads
0