Slug trap
Description
3MF file contain two parts, you need to rearrange them to lay flat. All inclinations to not got below 30° so parts could be printed without supports (although inner side will not look smooth but who matters 😄). The top can be secured with four 1o×⌀2 mm screws. The inner volume is supposed ti be filled 50% with beer, and whole trap to be digged into the ground for 2/3 of the bottom part height. Dimensions (D×H): * Large slug trap: ⌀100×90 mm * Small slug trap ⌀80×70 mm
Statistics
Likes
0
Downloads
0