API 4WW Water Wiggler Replacement Parts
Description
I own a couple [API 4WW Water Wiggler Water Agitator for Bird Baths](https://www.amazon.com/4WW-Water-Wiggler-Agitator-Baths/dp/B00075M3W6) and the raccoons are always chewing up the floats and the little plastic mount. I designed these replacement parts based roughly on the original parts, but tweaked them a bit to my liking. Specifically I made the floats larger, so they produce larger ripples in the water. Here is a [link to the onshape files](https://cad.onshape.com/documents/697a6916ba8d8808bf8c358a/w/f4059c6904ab9050103daa10/e/3428d92659dd738b7d756df9) if you want to make any modifications. - Make sure to print the floats with less than 100% infill so they float better. I printed them at .3mm layer height. - The mount can be printed with any infill, but make sure to do a few solid top and bottom layers and several walls for strength. I printed it at .2mm layer height. - The metal arm should be a tight fit in the mount, but the floats should slide easily. PETG would be better than PLA since they tend to be in the sun. I suppose ABS would be ideal, but I don't print that at the moment.
Statistics
Likes
0
Downloads
0