Klipsch R-34C Center Channel Stand Riser
Description
I created this because I needed to elevate my Klipsch center channel a few inches higher. It was designed to just be a tiny bit oversized from front to back so that variations in printers would still let it fit. May work for additional center channel speaker models, unknown. I designed it specifically for the R-34C. Because it's supporting some weight, and will be subject to vibrations from the speaker, I elected to print mine with thicker walls, but feel free to experiment. To speed printing, I used adaptive layers, so the printer spaced out the layers for the bulk of the print, but tightened them up when there were complex curves requiring higher vertical resolution. (this explains the band on the printed part in the photo) I used two, evenly spaced, but if you're feeling dangerous, I found the speaker also balances well with just one.
Statistics
Likes
0
Downloads
0