Dromida BX4.18 fan shroud for brushless motor
Description
If you are looking at pushing your Dromida BX4.18 at higher speep by using a S3 power pack. The motor will need to be cooled down with a fan. I design this motor shroud for a hobbywing Cyclone 3010 bh/6v. If you are running this small roadrunner on asphalt you will reach some pretty impressive speed for the size. Make sure to check the alignment of your wheels otherwise the tires will wear unevenly. I made some adjustment after two runs. A little too late for this set!! Use petg or ABS print with the square of the fan on the printing bed Layer at .16 nozzle.4
Statistics
Likes
0
Downloads
1