ENT 1" Smurf Tube conduit Connector
Description
Over the summer, we had to re-roof the house, I decided it was time to run ENT NON METALIC CONDUIT Tubing or sometimes called "smurf tube" for cameras and sensors along the soffit. when I ordered the tubing from a BIGBOX STORE they were all out of the connectors, so I made my own on the printer for cheaper. Please note there are 2 sizes 1" OD OR 1" ID of tubing. For the tubing in the photo I used 1 30mm OD Conduit Female x 1 NPT 1 inch Male Adapter for Flexible Plastic Conduit.stl I attempted using printed nuts, but that was a bad choice, they would be too tight to tighten or loosen in the future. Use metal 1 in. Conduit Locknuts found at your local hardware store. As a bonus, they help cut the threads of the printed connector. Attached are my different revisions for those that want to edit or change things. FYI: There are some STL files that have too thick of a lip inside this was later removed. Happy Making! Printed in PETG, Print in multiple colors for Identification as to where in the house your mystery tubes run and are terminated.
Statistics
Likes
0
Downloads
0