Dust collector adapter
Description
Item moved to: Straight version: https://cults3d.com/en/3d-model/tool/dust-collector-adapter 20° Version https://cults3d.com/en/3d-model/tool/dust-collector-adapter-20 Adapters for connecting 50mm pipes to a 50mm ID suction hose. Adapter have integrated ring for hose clamp. It is little tedious to push through the hose clamp and is necessary to bend the clamp and force it to engage the screw but after that it works flawlessly. Assembly instructions: 1) Straighten the hose clamp and cut to length – 220mm for easier pushing through the ring - Give the hose clamp tip a slight bend and push it through 2) Bend the ends up and level to each other and engage the screw 3) Tighten with a key (https://www.thingiverse.com/thing:6214934) - should straighten itself just by tightening the clamp 4) Should work as planned Recommended a 100% infill at least in the area of the hose clamp... Straight - 76g of filament 20°- 83g of filament
Statistics
Likes
0
Downloads
0