Creality K1/K1 MAX LED Light Strip Mount
Description
Hi, I created this 45 degree light bar mount do to the poor light given off by the factory 6 light LED strip in the front of the K1 and K1 Max. This print will let you slide a 10mm strip of led's to mount on the inside front and sides of your K1 and K1 Max with 3M tape. You do not need to remove the led adhesive covering, just slide the strip straight in. I have created this file for 24 led's per strip, of the brand I have linked, if you require more or less led's, you can resize the length "ONLY" of the .stl file. You will also need to solder a JST 2 pin female connector to the most convenient point of the led strip to plug into the factory male plug. I soldered mine to the right side corner snap jumper connector. LED Lights : https://a.co/d/bBs2krS Connectors : https://a.co/d/7WV4xmA 3M Tape : https://a.co/d/0KRiNH8 JST 2 Pin Connector : https://a.co/d/eMj3O8k
Statistics
Likes
0
Downloads
0