Filament holder (shelf) mount.
Description
Hello! This is a simple filament holder with only one rod! I did use 10mm aluminum rod, length is 2m. Main idea is in holding principle: there are two diagonal arms, that take must of the load and three horizontal arms, they do not allow to bend rod and diagonal arms. From one side spool is hold by the wall, but from the other side it is holden by the aluminum rod. Construction is very simple and lightweight. It can handle 25 spools with filament. I did use ABS filament to print it. Print specs: shell - 2.4mm infill - gyroid, 24% line width - 0.66mm line height - 0.3mm if you like my design, you could visit my other projects: https://www.molnija3d.ru https://vk.com/molnija3d
Statistics
Likes
0
Downloads
0