FTX Vantage Wing
Description
3D printable wing for the FTX Vantage. Prints in 3-5 parts: Main centre wing, winglets and two endplates. Print the centre part normally but with tree supports. Print the winglets so the outer face is flat on the bed and the scoops are facing upwards. Print the endplates flat and in a different colour (and then if you want put decals on like I did) Clean up printed parts and slot them together. Use superglue and glue gun to secure it. Optionally you can spray it with an acrylic lacquer, might make it easier to clean when it gets muddy (: Included in the files is also a quick fix mount. This is because the original mountings can snap if you rollover badly. If this happens to yours, cut those little tabs off and drill a screw into the wing into the mounting plate. I printed it in PLA, but feel free to try out other materials (like PA6-CF), and let me know if they work by commenting on the YouTube videos: https://www.youtube.com/watch?v=RIDhS162xMc https://www.youtube.com/watch?v=FeoxqxRELIs
Statistics
Likes
0
Downloads
0