Angle plate
Description
Angle plate for mounting a workpiece at 90° relative to a CNC router table. All slots are 6,5mm wide for M6 screw. - The workpiece part has a keyway for a 16mm M6 T-nut: https://www.thingiverse.com/thing:6307538 Table mounting slots have a 50mm axis to axis spacing. (Fits a Shapeoko hybrid table) Sizes 50x100x100mm and 100x100x100mm - For different mounting options check my hold down clamps: https://www.thingiverse.com/thing:6308416 https://cults3d.com/en/3d-model/tool/hold-down-clamp-jh_woodworks Other sizes on my Cults3D page Available sizes: - 50x100x100mm + 100x100x100mm https://cults3d.com/en/3d-model/tool/angle-plate-50mm-100mm - 150x100x80mm + 150x100x100mm + 200x100x100mm https://cults3d.com/en/3d-model/tool/angle-plate-150mm-200mm - 250x100x80mm + 250x100x100mm https://cults3d.com/en/3d-model/tool/angle-plate-250mm - Also available is angled versions in one bundle: 45°, 60°, 75°, 80°, 90° https://cults3d.com/en/3d-model/tool/angle-plate-angles Printed on the mounting side. The support ribs printed fine, slight fuzziness 50% infill with 5 walls loops and top + bottom shell layer. (Probably overkill) Took 480g of filament for the largest size
Statistics
Likes
0
Downloads
0