NEW - Kid Playing With Magnet Kite (with led)
Description
## Material - [Magnet](https://www.amazon.it/dp/B08K2VGZ3D?psc=1&ref=ppx_yo2ov_dt_b_product_details): 20x3mm (use 2 magnets to increase the strenght); - [Switch button](https://www.amazon.it/dp/B09QQLTQ1C?psc=1&ref=ppx_yo2ov_dt_b_product_details): 12,7x6,7x18,5; - [Metal Hook](https://www.amazon.it/gp/product/B07M7TBN83/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1): You can get it from a bracelet kit; - [LED](https://www.amazon.it/KINYOOO-emissione-luminosa-Diffusore-rotondo/dp/B07DPJ23YT/ref=sr_1_1_sspa?crid=1IR42Z5NCDBV0&keywords=led+arduino&qid=1688818437&sprefix=led+ard%2Caps%2C89&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1): Simple led 2 pin; - [Battery](https://www.amazon.it/AmazonBasics-LR44-Alkaline-Button-6-Pack/dp/B07JLBCH8L/ref=sr_1_1_ffob_sspa?keywords=lr44&qid=1688820137&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1): 2 x LR44 - [Cable](https://www.amazon.it/gp/product/B07G72DRKC/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1): 2 pices of common electrical wire; - String: ex dental floss; ## How to 1. Cut the third pin of the switch button; 2. Connect the wire to the switch button; 3. Insert the cable inside the magnet hole and onnect the other side to led; 4. Insert the cable inside the magnet hole near the switch button 5. Glue the switch button on the 3d printed street lamp; 6. Insert the cable into the 3d printed street lamp; 7. Use a metal wire to make contact from the switch button to the battery; 8. Insert the battery near the switch button; 9. Close and glue the street lamp; 10. Add another magnet to increase the strenght 11. Assemble base, kid and street lamp; 12. Make a little hole into the kite and put the dental floss; 13. Tie the string on the kid hand; 14. Turn on the switch button;
Statistics
Likes
0
Downloads
0