Limitless (Liberty) paramotor strobe mount
Description
Strobe mount for this strobe set from Amazon: https://www.amazon.com/dp/B0BM9ZJ1K6?ref=ppx_yo2ov_dt_b_product_details&th=1 This mount uses dual mount technique, screws and zip ties to mount. The last thing you want is anything coming lose and going through your prop. Print two of these and put them back to back and screw them together with either 2 short drywall or wood screws. Then run 2 zip ties through the slots to add a redundant attachment method. (You may have to enlarge the screw holes appropriately for your screws. You can then use the 3m mounting adhesive that comes with the strobes to mount one on top and one on the bottom so you can be seen from all angles. I also recommend a length of clear packing tape around to hold the strobes in place. If you use this method, you will either have to charge your strobes in place, or remove the packing tape so you can then remove the strobes to charge them. I also included the Fusion 360 .f3d file.
Statistics
Likes
0
Downloads
0