PowerCore 3D Printable Case Sides
Description
This is a replacement option for the aluminum extrusion sides from Protocase. Dimensions are mostly the same, the only exception is that the top/bottom grooves are 1.7mm less deep (for strength), so the top/bottom covers will need to be trimmed slightly. Holes are sized for M3 threaded inserts. Mounting tab is to hold the PCB resistor, and is sized for an M4 threaded inserts. Length is 300mm, so make sure you're printer is big enough. Highly recommend printing face-down. Note: I have only printed test sections of this, not the entire thing, so I've marked as "Work-In-Progress" in case anything needs to change. But it should be good.
Statistics
Likes
0
Downloads
0