Solder Stencil PCB Jig
Description
This tool is designed to be a dedicated jig for solder stenciling surface mount PCBs. Once set up its locked together so you don't have to dial it in every time you want to make a pcb! This model is designed for 120mm x 120mm stencil. To modify for your uses you only need to modify the "PCBStencil_CustomTray_Blank". You can import it into Tinkercad and subtract your PCB's silhouette from it. The silhouette should be enlarged in X & Y by 0.3mm to provide tolerance, and should be the exact thickness of your pcb. ( I.e. cut out 100.3mm x 100.3mm x 1.6mm for a 100mm x 100mm x 1.6mm pcb.) Also cut out a groove for your fingers to grab it. I made this one to prove the concept. Curly Tale Games is developing a web app with reconfigurable OpenSCAD features: https://curlytalegamesllc.github.io/SolderStencilPCBHolder/ -Uses 4x #4-3/8" thread forming screws: https://amzn.to/3SFyKIZ -Print Settings: Minimum 3 perimeters & 10% infill for rigidity. No supports necessary. -Use double sided tape to hold both the "Tray_Blank" and the stencil in place. I used 1mm thick tape but the jig can accommodate up to 1/8" thick tape. (I used these https://amzn.to/3QYcKbh) PCBway Signup bonus: https://pcbway.com/g/6488JG
Statistics
Likes
0
Downloads
0