Anycubic Kobra Plus Direct Drive Mount II v1.0
Description
I wanted to make a mount that would function as closely as possible as a direct drive would. These are the final versions after 7 or 8 designs that felt too awkward to be practical. I saw various existing adapters out there, but I really wanted to be able to put together something using all the original parts of my printer and with a minimum of externally sourced parts. You will only need to source three (3) M3 nylon locknuts, one or two collect lock-clips, along with wire to extend the length of the extruder stepper motor and the filament sensor depending on which version you choose to use. I don't count filament as an externally sourced part. This mount should work on Anycubic's Vyper, Kobra Plus, and Kobra Max models that use the same printhead assembly as shown in the pictures. It also has a built-in chain-link attachment point that is compatible with UncleSash's Anycubic Vyper V2 Kabelschlepp (Chainlink) or its remixes. (https://www.thingiverse.com/thing:5202027)
Statistics
Likes
0
Downloads
0