Ikea Hejne Filament Holder
Description
Specifically made to fit the (78x50x171 cm (30 3/4x19 5/8x67 3/8 ") sized Hejne shelf from Ikea (https://www.ikea.com/ca/en/p/hejne-shelf-unit-softwood-s79031414/), but can easily be adjusted for the smaller sized shelf (just need to shorten the rods!) You will need to print 2x the Holder and 2x the rods. After printing the rods you will need to glue them together. Please make sure to use a very strong glue (I'd also recommend using something like gorilla tape after gluing the rods together to add more strength to the rods). You can also purchase a wooden rod to use instead of the printed ones (Size: Diameter: 2.7CM Length: 45.7cm). You will also need 8x (5mm/7mm x L:30mm ) Screws with nuts to fasten the print to the shelf. The rods are super easy to remove so you can add more filament spools as you go! And is placed in a way to directly feed into the printer :)
Statistics
Likes
0
Downloads
0