Elegoo Saturn 8K Heater, riser & USB connector and louver window
Description
Top plate for the heater and fan is direct replacement for stock z tower plate. Printed in PETG for temperature resistance. Riser is printed in 4 corners to fit 200mm print bed, joints are 1/8" thick 0.75x1.5" Alu or steel plates with 10-32 tapped holes 1" apart, about 5/16" from edge (plates doesn't have to be as wide and long as the printed riser slot to have some room for adjustment). Printed in PLA for speed and strength. USB cable is custom but if you don't feel to solder these small connectors, you can try to cut and fit USB cable you have at hand. Louver window is direct replacement for stock cover. Printed in resin for accuracy. Hardware: riser joints - 8x 10-32 screw 0.250-0.312" long USB cable cover - 3x 6-32 screw 0.312 long 3x 6-32 nut controller case backplate - 3x 4-40 or 3mm screw heater mount - fan - 4x wood or sheet metal screw Heater hardware is from this Thing: https://www.thingiverse.com/thing:3442165
Statistics
Likes
0
Downloads
0