Doctor Eggman Backlit Keycaps
Description
Decided that Doctor Eggman was missing, so I've tried my best and mixed this two files together and accomplished something that almost looks like Eggman, so it works good enough for me! For the process I've used UV Hard Resin and followed the original design instructions with a simple mold from Aliexpress to be able to make the stem of the keycap. Complete and Original Instructions: https://www.thingiverse.com/thing:4780124 Don't forget to make a small layer on top of the keycap after all the work done, to make it look more even since you might get some marks from the tape. I used a toothpick to help me spread it. Hope this helps someone also complete the "base set". Note: You should always pour the resin slowly to help prevent more bubbles from forming. Second note: Before the last layer I used some 800 and 1000 grit sanding paper to give a more polished look. It can get a bit tedious until you start seeing some results.
Statistics
Likes
0
Downloads
0