Bosch GSR 12V Vice clamp and rpm adjuster
Description
This assembly clamps a BOSCH professional battery drill GSR 12V-35FC securely into a bench vice. I can't say which other derivates of this drill have the same housing geometry, there are some that look quite alike but are just longer towards the rear like the 12V-5. The optional barrel will actuate the throttle to any level between 0 to 100%, and hold it steadily as you have your hands free to operate other appliances. In my case it was a hot air blower to for heat shrinking. The barrel can be inserted from either side. Print: no supports needed. I printed in PLA with 0.6mm nozzle and 0.3mm layer height. 9 1/2 hours in total.
Statistics
Likes
0
Downloads
1