MTF-01 Optical Flow & Lidar Sensor Case（Designed by ROBOFUSION）
Description
The enclosure of this MTF-01 Optical Flow & Lidar Sensor is designed by ROBOFUSION. Its primary function is to protect the sensor. Due to the elevated copper pillars on the sensor compared to the PCB board, it's prone to bumps when mounted on a drone. This enclosure effectively safeguards the sensor. To install the upper and lower casings, you'll need four M2.5*10 screws and four M2.5 nuts. You can easily affix the encased sensor onto any drone using double-sided tape or secure it with screws that penetrate the sensor and the drone body (screw length depends on your drone's board thickness). This enclosure can be manufactured using common FDM or SLA 3D printing processes. Additionally, you can purchase this module here: https://robofusion.net/products/mtf-01-integrated-laser-rangefinder-optical-flow-module-for-unmanned-aerial-vehicles-uavs Show less...
Statistics
Likes
0
Downloads
3