Litter Robot 4 - Tall Shield Update - (Fence Enlargement)
Description
#Fence Update (Tall Version) ##Description The purpose of this shield is to keep tall cats from lifting their butt over the fence while using the litter robot 4. It is placed on top of the original fence. The model consists of six parts that are screwed together: - 2x mounts (lateral), - 2x shields (choose between straight or inclined), - 1x mount (middle), - 1x cover. In addition you will need: - 8x M5 nuts, - 4x M5 x 10 mm bolts (or larger), - 4x M5 x 16 mm bolts (or larger). ##Printing - I recommend using PETG, since a tough material is needed. In my opinion, PLA is to brittle and might brake. - You can print all parts without using supports. - Print time is around 24 hours, depending on your printer settings. ##Assembling 1. Stick the nuts into the deepenings on the backsides of the mounts. 2. Screw the cover, both shields and the central mount together. Do not screw them rigidly together, since they still need to be movable for later adjustments. 3. Snap the lateral mounts into the inside of the entrace, just above the original LR4 fence (start with hooking in the backside and then pressing the whole mount against the side of the LR4 entrance until it snaps into place) . 4. Take the assembled shield from step 2. and snap it to the top of the original LR4 fence (by pushing it gently against the top of the LR4 fence). 5. Screw the shields to the lateral mounts and then tighten the bolts on the central mount. ##Feedback Let me know if my design could fix your problem and feel free to support my work :)!
Statistics
Likes
0
Downloads
7