FPV Backpack Mount
Description
<h2>FPV Backpack Mounting Plate</h2> - **Screw Size:** M3 - **Holes Dimensions:** 25mm*35mm - **Vertical Strap Width:** 2mm <h3>Instructions</h3> 1. Print at least **2 plates and covers** (recommended: 2 plates + 4 covers) 2. **Mark the area** on the backpack and **poke the 4 holes** with the given dimensions 3. Fit the covers on the **short end** of the plates 4. With the cover **facing the backpack**, thread the screws in and through the backpack 5. Place the second cover-fitted plate on the inside of the backpack and thread it through 6. End result should have 2 plates **sandwiching the covers** with the backpack fabric in the middle Print with PLA/other rigid materials
Statistics
Likes
0
Downloads
0