External thermometer mount on 1515 extrusion for Voron V0.2
Description
As the BigTreeTech SKR Pico doesn't have additional thermistor inputs, I decided one of the very common thermometers from Aliexpress will do just fine (the V0.2 chamber heats up pretty quickly, so there's no actual need to have a chamber thermistor). However, after about 50 degrees, the thermometer's display went completely black (don't worry for the thermometer, it recovered after it cooled a little). But that meant it was not possible to put the thermometer inside the chamber … back to the drawing board. As I had previously purchased [one of these thermometers](https://www.aliexpress.com/item/1005002571230144.html) with an external temperature probe (not an affiliate link), I used an URBI-plate with [a small addition for the probe](https://www.printables.com/model/408745-v0-upper-rear-bowden-inlet-urbi/comments/1129572) and designed this mount to attach the thermometer to the vertical extrusions of the tophat, behind the “glass”. It's designed to be mounted on the A-side extrusion, but you can obviously use the mirror-along-Y-axis function to mount it on the B-side. It fits the standard 3 mm panels, no gaps anywhere. You'll need to insert an M3 nut (easy to do, since we're talking about the top extrusion) and attach the mount with an M3x12 BHS or SHS. Print logo face up, no supports.
Statistics
Likes
0
Downloads
0