Simple toilet paper shelf (spiral/vase mode)
Description
Easy and fast printing in vase mode. 35-40 grams of plastic. When printing, you need to set the line width in the settings to 0.6 mm (0.4 mm nozzle can print with this width) Print the first layer slower (I use 20 mm/sec), and starting from the 2nd layer you can set the speed to high (I use 75 mm/sec) It can be done faster, especially if a 0.6 mm nozzle is installed. The bottom thickness should be set to 0.6 mm. After printing, the shelf is glued to the tile, for example, with acrylic glue
Statistics
Likes
0
Downloads
0