Dual orientation nametag attachment for 2.9" epaper shelf tag
Description
This thing is made to support the 2.9" Solum 2900 epaper shelf tag as a nametag. it's configured to mount straight on a collar, breast pocket or pants pocket. The hook can be removed to mount at a 90 degree angle to support an open sweater, coat or vertical collar. It snaps in place with a satisfying click. Best to remove the batteries before use, due to the weight. It's easy to print, has good tolerances and has minimal support requirements. Best results were achieved with prusaslicer, but i'm confident most slicers will do just fine. After removing supports, it hooks under the bottom of the tag and clips on the top. To remove, shift sideways and unhook one of the bottom supports, then slide off For the openepapertag project that these tags work with, check out: https://github.com/jjwbruijn/OpenEPaperLink/wiki/2.9%E2%80%B3-ST%E2%80%90GR29000
Statistics
Likes
0
Downloads
0