Artillery Genius - IR Cam holder with gopro mount
Description
I edited the arm "soporte v3 2.stl" and shorten the length to accommodate an IR Camera connected to a Raspberry pi with a gopro mount so it can see even on the first layer (see third image). To secure it I used screws with the following dimensions 1 M3 x 20mm with a nut to secure the camera shell to the arm 4 M3 x 16mm to secure the faces of the shell with the camera inside As I'm using the original arm, the lower connection to the aluminum extruded profile is a bit loose, you can use electrical tape to gain a couple of mm on the inside of profile. No supports needed, I printed it with 15% infill and 4 top and bottom layers
Statistics
Likes
0
Downloads
0