Geeetech #D-touch v3.2 Pro bracket for a Voxelab Aquila S2
Description
I used the source model and the STL file from here https://cults3d.com/en/3d-model/tool/geeetech-3dtouch-v3-2-v3-2-pro-mount to create this bracket. I have the model oriented in the recommended way to print it. I am using the printsleo3d aquila S2 firmware and it works fine with the geeetech 3D Touch V3.2 Pro sensor. ON my setup the z-offset had to be set to -3.55 to get the optimal amount of squish from the print nozzle and textured PEI print bed. I currently do not have a picture of the printed model installed on my S2 as it's currently running a 13-hour print, but I will add one soon to show how it looks on the print head.
Statistics
Likes
0
Downloads
1