SodaStream Bird Feeder extended ring and extender tube
Description
Australian parrots are big units so I had to extend both the base plate of Bengineer's SodaStream bird feeder, and the Sodastream bottle itself. Made in Tinkercad. https://www.tinkercad.com/things/5426I27xYfz-sodastream-bird-feeder-extender-tube-and-extended-base-plate The flared bottom of the tube fits snugly onto a cut Sodastream bottle and is slightly more narrow than the top flared section in which the top ornamentation slots in from this remix. https://cults3d.com/en/3d-model/home/sodastream-bird-feeder Silcon the cut end of the Sodastream bottle to the top to keep the rain off. Drop the support ring on the tube mid print to avoid the need to cut it. Just print the right way up or flip the ring! (I got it wrong in the picture so had to cut it). I used support blockers (or I could have changed support angle settings) in Cura to stop supports generating to the top flared section on the tube, but they are needed for inside the bottom flared section.
Statistics
Likes
0
Downloads
1