Raspberry Pi 4B Case for Ender 3 V2 Neo
Description
This case mounts to the X motor cover with two M3 screws. Replace the screws that are already on the X cover with two M3x9.8 bolts. For the actual cover, you need two to four M2.5 bolts and nuts to secure the Pi, and two M3x20 bolts and M3 nuts to secure the top to the bottom. This case can be used with or without a 30mm fan. The version with a grill can mount a 30x30x8mm Pi fan on the inside with bolts no bigger than M3. There is also a no-grill version for thicker 30mm fans.
Statistics
Likes
0
Downloads
0