MSA Mask Blanking Plug
Description
A remix of the MSA to 3M adapter at https://www.thingiverse.com/thing:3465957 with the 3M part removed and the hole filled to create a blanking cap. Potentially useful for when you want to wear a respirator while doing something that requires more clearance on one side of your face than the filter allows for. Obviously don't use more than one at a time. I printed this on edge with tree supports, in PLA with 20% fill at 0.2mm with a .6mm nozzle, and it seals and seems strong enough, but your mileage may vary. Definitely test the seal before relying on this for anything, and use at your own risk.
Statistics
Likes
0
Downloads
0