LED STRIP MOUNT K1 MAX
Description
Take a look at my new mount for led strips on the K1 Max. It take advantage of 3 pre-made top holes for the side panels. What you need; Inserts 6pcs m3 short M3x12 6pcs 24v LED Stripes 2pcs 310mm or 3pcs if you want to have one at the front like i have. I did not use a mount for that one. Make or buy a y-splitter for the electrical connection. Left and front I connected in series and connected them to the splitter. Right just plug in to the splitter. I used 4pcs female and 3pcs of male jst 2 pin connectors. That gives me one extra connection for additional lights. 6 black cables 100mm each Original front LED uses JST "mini" connection, I replaced it with a regular size JST 2 pin male connector that fit my splitter. Look at my simple diy splitter in thumbnails. Note: I needed to use superglue for mounting the LED strips due to not sticking to ABS+ very well. Have a kick ass day! //Firefly
Statistics
Likes
0
Downloads
0