2020 3Corner Bracket with strong orientation
Description
This is a corner bracket to join 3 pieces of 2020 extrusion. It prints on the angle with no supports. All three axes have the same strength as none are aligned with the layer strata. Print it with the small triangle down, like a bowl. The models didn't show as I intended when they uploaded. It is set for M5 screws and T-nuts. The blisters allow for using 10mm screws and provide a little more strength against deformation under screw pressure. You can print without blisters if you are using 8mm screws. The foot option gives a slightly higher blister with a 4mm hole that can enlarged to thread in some kind of foot of your choosing. I print in PETG with .3 mm layers and a .6 mm nozzle.
Statistics
Likes
0
Downloads
0