MakerGear M2 Dual Extruder Dial Indicator Mount
Description
This Is A Modified Makergear M2 "Dual Harness And Fan Support". I Added A Branch Where A Dial Indicator Can Be Mounted With A 1/4-20 Screw (Or Similar Sized Metric Screw); Note That You'Ll Need To Tap The Hole Or Drill It Out Bigger. The Dial Indicator Needs To Have A Mountable Back (You Can Print A Mountable Back, One Of These 3D Model Sites Has A Model Of One). Remove The Dial Indicator Before You Print.
Statistics
Likes
10
Downloads
0