Duct Collector Quick Connect
Description
I made a quick connect dust collection system using a toggle latch. The latch is attached with two 3mm screw. hardware: https://www.amazon.com/dp/B09MQDHR4W?psc=1&ref=ppx_yo2ov_dt_b_product_details I'm also opening the design on onshape, I created it for 2.5 in hoses, but you should be able to change the variables to fit your hose and tools: https://cad.onshape.com/documents/aa45a8b57307e098e92d67db/w/8bcfa0217415f7cf0e6a3f2a/e/32536486d7c30b398d458cb4?renderMode=0&uiState=656b3e842fa0d4100ce8d67d there are 3 main settings to change: hose_internal_diameter: set to 65 mm for 2.5 in hoses, change to fit your tool_port_external_diamter: to match your tool (set to 65 for my table saw), change to fit the port in your tool overlap: how much is the overlap between the hose and tool adapters, 19mm works well for 2.5 inch hoses, but might need to increase for 4 in hoses. I included adapters for the tools I have. if you have a custom tool port, like the hvac shop or the jointer with the extra holes, I created a base for custom connectors, you should just need a loft, extrude and shell to start.
Statistics
Likes
0
Downloads
0