Reindeer Phone Stand

Description

- Toy - Decoration - Phone stand - Keyring --- **If you want to sell prints of this models you can buy a commercial license here:** https://cults3d.com/en/3d-model/gadget/reindeer-commercial-license --- Check out more models from Phone collection https://www.thingiverse.com/c47_3d/collections/39433281/things and Xmas collection https://www.thingiverse.com/C47_3D/collections/17109714/things or Piggy collection (there are phone stands too) https://www.thingiverse.com/C47_3D/collections/17109797/things --- A lot of versions to print - Solid - easiest to print, only one model - Parts - to be printed in separate parts in different colors - 3Col - for multicolor printers Each with full body or with space for a phone (10-16mm - as in file names) Phone will be at 16° angle. Should work with horizontal and vertical placing (tested with 12mm phone with 12 and 14mm reindeer versions) If you will need other sizes or want it more stable (smaller hole version resized for bigger phone) you can resize any model in your slicer Use the equasion: 'Needed space (in milimeters)' divided by 'model number' multiplied by 100% = 'Needed model size in percent' For example if you need 16mm you can take 15mm version resized to: 16 / 15 * 100% = 106,66% You can also resize 10mm version to 160%. It will be more stable (model will be bigger) --- To make a **Keyring** use a model of your choice and add there a keyring addon (Reindeer_KEYRING-addon). Both models should be in the exact same position in your slicer to be sure that they will merge properly *Model printed in parts has separate back hooves with a keyring - no need to use an addon* **Then select both models and merge them (right click menu)** Keyring models are with a 'frame', a flat surface that will not be printed. This way it is easy to set it in the right spot - **Ignore model 'errors' and DO NOT try to 'fix' the model** After merging you can easly resize or rotate the model if needed The same with **Reindeer_PARTS_eyes-addon** wich can be uses with Reindeerr_PARTS This model adds eyes like in SOLID model, instead of holes for filament --- **3COL** All models are with an 'outline', flat model that will not be printed The same like with Keyring Normal color for body should be brown but chose what you want 'dark-brown' is with antlers and front and back hooves - I will add separate models if needed 'red' is with a nose --- **PARTS** As it is harder to print I added separate models (with dual antlers and hooves) After assembling parts should stay where they are You will hear a 'click' sound when it's pushed all the way For eyes you need few mm of filament (preferably a black one) If you don't want to do this (may be difficult) you can leave holes like it is (as on few models on photos) or use Reindeer_PARTS_eyes-addon to fill the holes and print it with a body (merged together) Pliers may be usefull for assembling, especially with eyes and antlers Hooves are symetrical so it doesn't matter what will go to the left and what to right Back hooves are bigger than front ones I printed antlers and all hooves together in one print ---

Statistics

Category

Tags