Waterproof and Dustproof 18650 Storage / Carrier
Description
Fits most 18650's, protected or unprotected. Unprotected batteries will rattle axially. Designed for use with 22mm OD x 2.4mm thick O-rings. Will likely work with different diameters but don't stray too far from intended thickness. Using something like Lubri-Film makes threading the cap on and off easier. Contributes to longevity of O-rings as well as waterproofing. Tested under cold running water, but not at any depth. I use this to carry a spare cell for my flashlight. Use at your own risk. Lithium-ion batteries are dangerous and this container is not intended to protect the cell from impact or damage. Do not print or reproduce with conductive materials. Use only the specified cell size (18650). This carrier has provisions for button tops to go in either way. If you feel resistance as you screw the head stop and confirm there is no interference with the battery. Tested with: SureFire protected 18650 Samsung 30Q Unprotected 18650 Cloud Defensive Unprotected 18650 Modlite Protected 18650 Panasonic Protected 18650 Thanks for your interest in my project.
Statistics
Likes
0
Downloads
1