Star Wars ATAT - Print in place, Articulated
Description
***GET THE COMPLETE PARTS!:** This is the one main part of Fab365’s premium design ‘AT-AT’. Sign up at Fab365.net and get all parts! [Go to Get All Parts >>](https://fab365.net/landing) Discover more free premium models at Fab365 and experience design excellence and high printing success rates. [Learn more >>](https://fab365.net/landing) ATAT stands for All Terrain Armored Transport and first appeared in the Star Wars . The characteristics of ATAT designed this time are first of all, 1) Almost every detail is described. It has described more detail than any ATAT produced by 3D printing so far. 2) Using the print-in-place and folding structure, almost all movements were implemented with just a few printings. How to make after printing is as follows. 1. Rotate and attach the neck to the connected lower body. ※ Caution※ If the neck is not attached to the lower body first, the upper body cannot be properly connected later. 2. Put the upper body on the lower body. At this time, use the elasticity to slightly open and fit. Then, attach the side parts to the upper body with adhesive. 3. Push the head and put it on the neck. 4. Fold the ankle and attach it to the leg with adhesive. 5. Push the foot and put it on the leg. 6. Glue the 4 legs prepared in this way to the body. Since the legs and neck can move in multiple angles, it is possible to create a scene in the movie. If you are having problems with printing, check out our printing tips. https://fab365.net/print-tips-list 1 : 144 scale Size, X 70mm, Y 191mm, Z 157mm
Statistics
Likes
149
Downloads
452