Customizable Battery Dispenser with Skadis T-Nuts
Description
This is a remix of the [Customizable Battery Dispenser](https://www.thingiverse.com/thing:4808156) but with holes and alignment guides added to fit an IKEA Skadis board. The holes are sized for M3 and I [used these T-Nuts](https://www.printables.com/model/273165-direct-screw-in-t-nuts-for-ikea-skadis-pegboards) in my prints but other M3 nuts should work. Utils.zip contains files that you should unzip next to the .scad files should you wish to create your own .stl: - The alignment guide taken from the [T-nut project](https://www.printables.com/model/228663-skadis-t-nuts-mounting-system-for-ikea-skadis-pegb) - Libraries from [nutsnbolts](https://github.com/JohK/nutsnbolts) for your convenience. ### Limitations It's not as fully customisable as the original. The mounting holes are in a single column and therefore only 3 columns and 1 type of battery is allowed at a time. This is because it's far easier to know where to put the holes than trying to space them out 40mm apart for any number of columns/batteries. There are also 3 holes (though I only use 2) and they're a fixed distance so just play around with the code if you need to change that.
Statistics
Likes
0
Downloads
0