heritage rough rider stock
Description
Combined WarHawk8080 and Jacoza's designs to make this awesome stock for my rough rider. Use a 3.5mm bolt, one 35mm long and one 28mm long. The grip pushes on/off from the back. I'd recommend using 15 minute epoxy to assemble. Put epoxy on the grip then attach to the 22 with bolts to insure proper alignment. Make sure as to not put to much epoxy and end up permanently attaching to 22. HAPPY PLINKING!!! P.S. I use Tinkercad HUGE THANKS TO JACUZA AND WARHAWK8080!!! Couldn't have done it without you two!
Statistics
Likes
0
Downloads
0