Stop for Festool FS track
Description
This Is A Stop Block That Fits A Festool Track. It Is Designed To Set Starting And Stopping Points For A Track Saw. An M6X12 Bolt Is Used To Tighten The Block With A Corresponding M6 Nut Trapped In A Plastic Adapter That Goes Into The Aluminum Extrusion. A Knob (Made With The Brilliant Nut Knob Generator: Http://Www.Thingiverse.Com/Thing:713300) Grabs The Hex Head Of The M6 Bolt, Making It Easy To Secure And Release The Block. A Washer Can Be Added To Serve As A Spring, Between The Knob And The Block, But This Is Not Mandatory. The Block Has A Round Notch That Catches The Corner Of The Base Of The Saw So There Are Two Models: A Start/Front Block And A Stop/Rear Block. Typically Print One Of Each Block And Two Knobs Plus Two Nuts. 2017-05-16: Added A Start-Front Symetrical Version Of The Stop As Requested ;)
Statistics
Likes
458
Downloads
0