Biqu H2 V2S Volcano Mount for Ender 3 S1 with Sprite Extruder PCB
Description
Introducing I didn’t find a single mount for the BIQU H2 V2S extruder for my Ender 3 S1, so I decided to make my own. I liked the solution for the Sprite Extruder using one cable for connection and a quick-removable design, so I decided to use a board from the Sprite Extruder in my model. Due to the fact that there are many options for cooling blowers for BQ, I decided to take a ready-made solution from @IBIProductions, only changing it a little. I added support for the Volcano heatblock, slightly improved the cooling of the hotend and redesigned the size for the new mount. Perhaps there are errors and shortcomings in this model, I would like you to try this model too and leave your feedback and suggestions. Bill of Materials: 4 pcs inserts M3*3mm 3 pcs inserts M3*5mm 4 pcs M4*20mm round head screws and 4 M4 nuts for mounting 5015 fans 4 pcs round head screws M3*25mm for fastening the extruder on the motor side 2 pcs M3*20mm round head screws for fixing the hotend fan 2 pcs M3*8mm socket head screws for fixing the sensor 5 pcs M3*6mm round head screws for attaching the 5015 fan mount and board to the extruder 4 pcs M3 washers for CRTouch mounting 2 pcs socket head screws M2*16mm for fastening the cable holder 4 pcs of screws with a socket head M2*8mm for fastening the air nozzles to the fan holder 5015 Some of this can be taken from the old extruder and from the new one Information about the assembly can be found in the .step file I attached. You can open it in any CAD software. Settings: I'm using Klipper, so here are some of my settings for this extruder: [stepper_x] position_min: -32 position_endstop: -32 position_max: 240 [stepper_y] position_min: -20 position_endstop: -20 position_max: 224 [bltouch] x_offset: 66.6 y_offset: -6.0
Statistics
Likes
0
Downloads
0