BLING in the New Year - Novelty Gold Chain
Description
This is a novelty gold chain with removable magnetic faceplates! Unfortunately, this print requires a brim for each chainlink. That means it will require some cleanup once the print is complete. The better the cleanup, the more comfortable the chain is to wear around your neck. There are minimal supports required. They are painted on and included in the print profiles. The magnet holes are **TIGHT**, very tight. This is on purpose so you don't need glue to keep the magnets secure. I ended up using a chisel and a rubber mallet to hammer the magnets in. As you can tell from the photo, I only needed 5 magnets for good sticking power. I used these specific magnets: (affiliate link) [4mm x 2mm circle magnets](https://www.amazon.com/dp/B0C233JCBN?th=1&linkCode=ll1&tag=tmsthingiverse-20&linkId=cbdd09e69f0eedc9503ded522b8ce655&language=en_US&ref_=as_li_ss_tl). For Bambu Lab owners, I have included print profiles! The hole in the bling plate is for pushing the faceplate out easily to swap them. You can easily customize the faceplates for whatever you'd like. The included faceplate is blank (unless you use the included print profiles!). You can customize to whatever you'd like! Disclosure: As an Amazon Associate, I earn from qualifying purchases.
Statistics
Likes
0
Downloads
0