UltiMaker S5 Dual spool holder
Description
Low-friction holder for two (big) spools mounted on the rear of the printer. You need 4 bearings with diameters 5mm - 16mm and width 5mm. Not the most common, but I had some of them available :) Print the main part with very solid profile if you want to place 1kg spools: >=4 external walls and >=30% infill. Print the axes vertically so that they are properly round. Link to Onshape project: https://cad.onshape.com/documents/e91f267efaa051569825a0bb/w/58b837b74b6dd5c9c8a0b653/e/0b068b8e50647a963bd07e76
Statistics
Likes
0
Downloads
0