Hanging Christmas tree tea light ornament
Description
LED Hanging Tea light Christmas Tree! Hi, here’s my Christmas tree tea light cover to add a bit of holiday cheer! Designed to be an easy print that can fit even on small printers and to print in place with no supports or raft needed. Place upright on the bed, choose your favourite print settings and hit print! Size: 61mm high and 52mm wide There are 4 prints to choose from, two variations with two options. One has no loop to use as a table ornament and one has a loop so it can be hung. Both have two options for the tea light hole, choose the 15mm diameter hole to sit the tea light underneath so only the light is inside. Or choose the 32mm dimeter hole to hide the tea light completely inside the print. Options: - Tea Light Christmas Tree 15mm Hole - Tea Light Christmas Tree 32mm Hole - Tea Light Christmas Tree with loop 15mm Hole - Tea Light Christmas Tree with loop 32mm Hole As this has been designed to be an easy print there is no clips or brackets to hold the tea light in place if hanging. If you are wanting to hang this, I recommend using double sided tape or a bit of hot glue to hold the tea light in place. Printer Settings: Every printer is different, so I recommend using your favourite print settings for non-complex designs but as a guide, I used: Shells: 3 Infill: 20% Layer Height: 0.2mm Rafts: NO Supports: NO DO NOT USE THIS WITH REAL CANDLES, ONLY TO BE USED WITH LED/ELECTRIC TEA LIGHTS. As always, have fun printing and don’t forget to show off your prints! Happy Printing!! :)
Statistics
Likes
1
Downloads
2